Nintendo Switch 2 Joy-Con Drift: Drifting and Shaking Sticks

Stick drift on the Nintendo Switch 2 Joy-Con 2 controllers appears when the sticks collect dust, wear out or lose calibration. Start with stick calibration in system settings, update the controllers and console, and clean around the sticks with dry air. If drift continues, use Nintendo's official repair service; never apply liquid cleaners.

  • Updated:
  • 3 min read
  • เวลาโดยประมาณ: ~7 นาที
  • 7 ขั้นตอน
สารบัญ9
  1. ⚡คำตอบสั้น
  2. 01Calibrate the control sticks
  3. 02Update the console and controllers
  4. 03Re-pair the controllers
  5. 04Clean around the sticks with dry air
  6. 05Test another game and another controller
  7. 06Review dead zone and control settings
  8. 07If drift continues, use Nintendo repair
  9. SSคำถามที่พบบ่อย

คำตอบสั้น TL;DR

Start stick calibration from Settings > Controllers and Sensors > Calibrate Control Sticks. Update the console and controllers, re-pair the Joy-Con and clean around the sticks with dry air. If drift continues after calibration, use Nintendo's official repair service; it may be free under warranty.

หน้าทางการ

nintendo.com

Nintendo — official Joy-Con stick drift support page

At a glance

เวลา~7 นาที
ขั้นตอน7
ความยากง่าย
แหล่งทางการnintendo.com
อัปเดตล่าสุด

01 — วิธีแก้ทีละขั้นตอน

How do you fix it? Step by step

  1. ขั้นตอน 1/7

    Calibrate the control sticks

    From the HOME Menu open System Settings > Controllers and Sensors > Calibrate Control Sticks. Follow the on-screen instructions, rotate both sticks fully and save the center position. Calibration fixes most software-related drift.

  2. ขั้นตอน 2/7

    Update the console and controllers

    In System Settings > System > System Update confirm the console is current. Then go to System Settings > Controllers and Sensors > Update Controllers and update the Joy-Con 2. Keep the controllers attached during the update.

  3. ขั้นตอน 3/7

    Re-pair the controllers

    Turn the console off and detach the controllers. Open Controllers > Change Grip/Order on the HOME Menu and pair them again. If wireless interference is suspected, test with the controllers attached; if the problem disappears, the connection is the cause.

  4. ขั้นตอน 4/7

    Clean around the sticks with dry air

    Turn the controllers off and gently remove dust around the sticks with compressed air or a dry air blower. Rotate the stick fully and repeat. Do not use liquid cleaners, WD-40 or oil; they can damage the sensor and plastic parts.

  5. ขั้นตอน 5/7

    Test another game and another controller

    To see whether the game or the controller is at fault, test with a different game and, if possible, a second pair of Joy-Con 2. If the same controller drifts in every game, the controller is the problem; if only one game drifts, check that game's dead zone settings.

  6. ขั้นตอน 6/7

    Review dead zone and control settings

    Some games offer a dead zone setting. If drift is mild, increasing the in-game dead zone provides temporary relief. It does not fix hardware drift; it only reduces the symptom.

  7. ขั้นตอน 7/7

    If drift continues, use Nintendo repair

    If the stick still moves on its own after calibration, updates and cleaning, open a repair request from Nintendo's official support page. Warranty coverage varies by country; have the console and controller serial numbers ready.

    Record a short video showing the drift before the repair; it speeds up the service evaluation.

02 — People also ask

คำถามที่พบบ่อย

Is Switch 2 Joy-Con drift repaired under warranty?

It may be covered under Nintendo's warranty terms, which vary by country. Without impact or liquid damage the repair can be free; the authorized service provider makes the final decision.

Does calibration fix drift permanently?

For software-related drift it can be permanent; for physical wear or dust it only provides temporary relief. If the problem returns, the stick or controller needs replacement.

Can I clean with WD-40 or alcohol?

No. WD-40, alcohol and oily cleaners can damage plastic parts and sensors, and liquid residue can make drift worse. Use only dry air and a dry cloth.

When should I buy a new controller?

If repair takes too long or is out of warranty, a new pair of Joy-Con 2 is a practical option. Check the Nintendo repair option first; free repairs are sometimes possible.

คู่มือนี้มีประโยชน์ไหม?

ความคิดเห็นของคุณช่วยให้คู่มือทันสมัยและได้รับการตรวจสอบ

Sources & verification

This guide is written by the CopyPromt editorial team based on the official source below and is re-checked regularly.

  • nintendo.com — แหล่งทางการ
  • Published:
  • อัปเดตล่าสุด:
  • คู่มืออิสระ — ไม่มีความเกี่ยวข้องอย่างเป็นทางการกับ nintendo.com