Nintendo Switch 2 Joy-Con Drift: Drifting and Shaking Sticks
Stick drift on the Nintendo Switch 2 Joy-Con 2 controllers appears when the sticks collect dust, wear out or lose calibration. Start with stick calibration in system settings, update the controllers and console, and clean around the sticks with dry air. If drift continues, use Nintendo's official repair service; never apply liquid cleaners.
目次9
簡潔な回答 TL;DR
Start stick calibration from Settings > Controllers and Sensors > Calibrate Control Sticks. Update the console and controllers, re-pair the Joy-Con and clean around the sticks with dry air. If drift continues after calibration, use Nintendo's official repair service; it may be free under warranty.
公式ページ
nintendo.com
At a glance
| 時間 | ~7 分 |
|---|---|
| 手順 | 7 |
| 難易度 | 簡単 |
| 公式ソース | nintendo.com |
| 最終更新 |
01 — ステップごとの解決策
How do you fix it? Step by step
-
ステップ 1/7
Calibrate the control sticks
From the HOME Menu open System Settings > Controllers and Sensors > Calibrate Control Sticks. Follow the on-screen instructions, rotate both sticks fully and save the center position. Calibration fixes most software-related drift.
-
ステップ 2/7
Update the console and controllers
In System Settings > System > System Update confirm the console is current. Then go to System Settings > Controllers and Sensors > Update Controllers and update the Joy-Con 2. Keep the controllers attached during the update.
-
ステップ 3/7
Re-pair the controllers
Turn the console off and detach the controllers. Open Controllers > Change Grip/Order on the HOME Menu and pair them again. If wireless interference is suspected, test with the controllers attached; if the problem disappears, the connection is the cause.
-
ステップ 4/7
Clean around the sticks with dry air
Turn the controllers off and gently remove dust around the sticks with compressed air or a dry air blower. Rotate the stick fully and repeat. Do not use liquid cleaners, WD-40 or oil; they can damage the sensor and plastic parts.
-
ステップ 5/7
Test another game and another controller
To see whether the game or the controller is at fault, test with a different game and, if possible, a second pair of Joy-Con 2. If the same controller drifts in every game, the controller is the problem; if only one game drifts, check that game's dead zone settings.
-
ステップ 6/7
Review dead zone and control settings
Some games offer a dead zone setting. If drift is mild, increasing the in-game dead zone provides temporary relief. It does not fix hardware drift; it only reduces the symptom.
-
ステップ 7/7
If drift continues, use Nintendo repair
If the stick still moves on its own after calibration, updates and cleaning, open a repair request from Nintendo's official support page. Warranty coverage varies by country; have the console and controller serial numbers ready.
Record a short video showing the drift before the repair; it speeds up the service evaluation.
02 — People also ask
よくある質問
Is Switch 2 Joy-Con drift repaired under warranty?
It may be covered under Nintendo's warranty terms, which vary by country. Without impact or liquid damage the repair can be free; the authorized service provider makes the final decision.
Does calibration fix drift permanently?
For software-related drift it can be permanent; for physical wear or dust it only provides temporary relief. If the problem returns, the stick or controller needs replacement.
Can I clean with WD-40 or alcohol?
No. WD-40, alcohol and oily cleaners can damage plastic parts and sensors, and liquid residue can make drift worse. Use only dry air and a dry cloth.
When should I buy a new controller?
If repair takes too long or is out of warranty, a new pair of Joy-Con 2 is a practical option. Check the Nintendo repair option first; free repairs are sometimes possible.
このガイドは役に立ちましたか？
フィードバックはガイドを最新かつ正確に保つのに役立ちます。
Sources & verification
This guide is written by the CopyPromt editorial team based on the official source below and is re-checked regularly.
- nintendo.com — 公式ソース
- Published:
- 最終更新:
- 独立したガイドです — nintendo.com とは公式な関係はありません。