Galaxy Z Fold 8 Screen and Hinge Problems: Crease, Gap and Dead Touch
Independent guide — no official affiliation with the platforms mentioned.
Resposta curta
A light crease in the middle of the Z Fold 8's inner screen and slight shading at the hinge are part of the factory design. But the screen not opening, touch dying along the hinge line or a scratching feel while folding can be software calibration or a hinge defect — distinguished by protector inspection, touch sensitivity settings and Samsung diagnostics.
Fonte oficial
samsung.com
Samsung Türkiye resmî destek
01 — Solução passo a passo
Solução passo a passo
STEP 01
Tell normal vs abnormal crease
With the inner screen off, view it against a white wall: a light vertical fold mark in the center is normal. Color shifts, bulges or cracks mean a panel defect — service needed.
STEP 02
Increase touch sensitivity
Enable Settings > Display > Touch Sensitivity. If the screen protector bubbles at the fold, touch dies only along the hinge line.
STEP 03
Inspect the screen protector
Samsung's factory protector creates a 'scratch-like' pattern at the fold; never peel it. If it lifted at the edge, Samsung service replaces it free — avoid third-party protectors.
STEP 04
Run Samsung diagnostics
Open Samsung Members > Support > Phone Diagnostics > Touch Screen. A dead zone along the hinge shows as a black area; screenshot it.
STEP 05
Assess hinge sound and gap
A click on new folds is normal (spring mechanism). Friction plus screen blackout while folding means the hinge cover loosened; record a 0-180 degree open-close test for service.
Dicas
- Never pocket the inner screen open — panel pressure deepens the fold line.
- Use the Fold Edition S Pen; a standard S Pen scratches the fold.
- If dead touch started after an update, check Settings > Software Update — early patches changed the touch frame.
02 — Perguntas frequentes
Perguntas frequentes
Is the Z Fold 8 crease covered by warranty?
The factory crease is excluded (part of the design). Color distortion, dead pixels or a widening fold line require a panel replacement under warranty.
Can I replace the inner screen protector myself?
No — the Fold's inner screen is calibrated with its protector; third-party sheets break touch and fold durability. Samsung service applies it free.
Is hinge looseness normal over time?
The Fold 8 hinge is tested for 200,000 folds; looseness in the first year is abnormal. Hinge module replacement is covered under warranty.
Este guia resolveu seu problema?
Seu feedback melhora nossos guias — leva 10 segundos.
Os links neste guia apontam para páginas oficiais das plataformas. As etapas podem mudar com atualizações; verifique a data da página.
03 — Guias relacionados