CP-156 Masalah ponsel Mudah

Galaxy Z Flip 8 Screen Crease and Touch Problems

A slight crease in the middle of a foldable screen is a natural result of the design and is not a fault by itself. On the Galaxy Z Flip 8, service is needed if touch fails in one area, the factory film is lifting or a green-pink line appears. Do not peel the film yourself; Samsung's authorized service can replace it.

  • Updated:
  • 3 min read
  • Perkiraan waktu: ~7 mnt
  • 7 langkah
Daftar isi9
  1. ⚡Jawaban singkat
  2. 01Identify the type of crease
  3. 02Clean the screen and hinge
  4. 03Remove thick cases and screen protectors
  5. 04Run the touch test
  6. 05Update the software and restart
  7. 06Do not try to fix a lifted film yourself
  8. 07Contact service for lines, spots or touch loss
  9. SSPertanyaan umum

Jawaban singkat TL;DR

A slight crease is normal; it forms at the hinge and does not affect the image. If touch fails in one area, the film lifts or a line appears, do not peel the film and contact service. First clean the screen, remove thick cases, update the software and run the Samsung Members touch test.

Halaman resmi

samsung.com

Samsung official support

At a glance

Waktu~7 mnt
Langkah7
Tingkat kesulitanMudah
Sumber resmisamsung.com
Terakhir diperbarui

01 — Solusi langkah demi langkah

How do you fix it? Step by step

  1. Langkah 1/7

    Identify the type of crease

    Turn the screen off and look at the hinge area. A thin, even line in the middle is the normal structure of a foldable panel. If a green or pink line, a black spot or loss of touch appears along with the crease, it is a hardware fault, not a cosmetic issue.

  2. Langkah 2/7

    Clean the screen and hinge

    Wipe the screen with a microfiber cloth while it is closed. Dust and sand around the hinge press on the panel when it folds and can cause touch errors. Do not use compressed air, and never spray liquid directly on the screen.

  3. Langkah 3/7

    Remove thick cases and screen protectors

    Thick cases that squeeze the hinge and third-party protectors can affect the folding angle and touch. Remove the case and test the screen directly. You may need to remove any protector applied after purchase, but never the factory film.

  4. Langkah 4/7

    Run the touch test

    In Samsung Members open Support > Diagnostics > Touch screen test. Drag your finger across the whole screen; if a strip does not respond, that area is faulty. Keep the test result for the service visit.

  5. Langkah 5/7

    Update the software and restart

    Install the latest One UI build from Settings > Software update, then restart the phone. Temporary touch driver bugs sometimes clear after an update or restart.

  6. Langkah 6/7

    Do not try to fix a lifted film yourself

    If the factory film is lifting at an edge, has dust underneath or shows bubbles, do not pull it. The wrong handling can scratch the panel or damage the protective layer. An authorized service center can replace the film under proper conditions.

    Do not remove the screen film or panel yourself; damaging the protective layer of a foldable panel can void the warranty.

  7. Langkah 7/7

    Contact service for lines, spots or touch loss

    If a permanent green or pink line, an ink-like black spot or touch loss appears, open a service request through Samsung support. Report any impact or liquid exposure; the evaluation depends on it.

02 — People also ask

Pertanyaan umum

Is a crease on a foldable screen normal?

Yes. On foldables such as the Galaxy Z Flip 8, a slight crease at the hinge is part of the panel design. It may become slightly more visible over time, but a line, spot or touch loss means service is needed.

Can I remove the factory screen film?

No, do not remove it yourself. The factory film is part of the panel's protective layer; incorrect removal can permanently damage the screen. If it lifts, an authorized service center must replace it.

Does cold weather affect touch?

In extreme cold the foldable panel and film become stiffer and touch response may slow temporarily. Do not fold or force the phone until it reaches room temperature.

What should I do if the touch test fails?

Take a screenshot of the test result and open a service request through Samsung support. Unauthorized repairs can affect the warranty; do not open the phone yourself.

Apakah panduan ini membantu?

Masukan Anda membantu panduan tetap terkini dan terverifikasi.

Sources & verification

This guide is written by the CopyPromt editorial team based on the official source below and is re-checked regularly.

  • samsung.com — Sumber resmi
  • Published:
  • Terakhir diperbarui:
  • Panduan independen — tidak berafiliasi resmi dengan samsung.com.