Skip to content
CP-014ويندوزمتوسط

Fix the CRITICAL_PROCESS_DIED Blue Screen, Step by Step

الوقت التقديري: ~20 دقيقة5 خطواتآخر تحقق:

Independent guide — no official affiliation with the platforms mentioned.

إجابة قصيرة

CRITICAL_PROCESS_DIED means a critical Windows process crashed — usually corrupted drivers or disk errors. Boot into Safe Mode, run SFC/DISM repair and a 'chkdsk /f' scan, or remove the latest update for an instant fix.

01 — إصلاح خطوة بخطوة

إصلاح خطوة بخطوة

  1. STEP 01

    Boot into Safe Mode

    Force-restart the PC 3 times during boot to reach Recovery, then Troubleshoot > Advanced options > Startup Settings > Restart and press 4 (Safe Mode with Networking).

  2. STEP 02

    Uninstall the latest update

    From Recovery, choose 'Uninstall latest quality update'. If the error started after a Windows update, this fixes it directly.

  3. STEP 03

    Run SFC and DISM

    In Safe Mode open admin CMD and run 'sfc /scannow' then 'DISM /Online /Cleanup-Image /RestoreHealth'.

  4. STEP 04

    Scan the disk

    Run 'chkdsk C: /f /r' and confirm the restart. The scan takes 20–60 minutes and repairs disk errors.

    Don't power off during chkdsk. If the drive makes clicking sounds, back up immediately.

  5. STEP 05

    Check drivers

    In Device Manager find devices with warnings; update GPU and chipset drivers from the vendor's site, or roll back a recently updated driver.

نصائح

  • Logging blue screen codes speeds up diagnosis of recurring issues.
  • If the loop continues, check SSD health with CrystalDiskInfo.

02 — أسئلة شائعة

أسئلة شائعة

What causes CRITICAL_PROCESS_DIED?

Most often corrupted system files, incompatible drivers, disk errors or RAM issues. If it started after an update, the update is the prime suspect.

The PC is stuck in a boot loop — what now?

Force-restart 3 times to reach Recovery. If that fails, use a Windows installation USB and choose 'Repair your computer'.

How do I test my RAM?

Search 'Windows Memory Diagnostic', run it and let the reboot test run. Results appear in Event Viewer.

هل حل هذا الدليل المشكلة؟

ملاحظاتك تحسن دليلاتنا — يستغرق 10 ثوانٍ فقط.

الروابط في هذا الدليل تشير إلى صفحات المنصة الرسمية. قد تتغير الخطوات مع تحديثات المنصة؛ تحقق من تاريخ الصفحة.

03 — دلائل ذات صلة

دلائل ذات صلة

CP-013ويندوز

Fix Windows Update Error 0x80070005 (Access Denied) for Good

Solve Windows Update 0x80070005 'access denied' with the troubleshooter, a SoftwareDistribution reset and SFC/DISM.

15 دقيقةمتوسط18 سبتمبر 2026
CP-023ويندوز

Fix Error 0x80004005: The 'Unspecified Error' in 6 Steps

Fix the 0x80004005 unspecified error step by step, covering update, file copy and virtual machine scenarios.

8 دقيقةمتوسط24 سبتمبر 2026
CP-024ويندوز

Fix Error 0x80070002: 'The System Cannot Find the File Specified'

Fix the 0x80070002 'file not found' update error with the troubleshooter, clock check and cache reset, step by step.

7 دقيقةسهل24 سبتمبر 2026
أخطاء ويندوز