Skip to content
CP-014Windowsमध्यम

Fix the CRITICAL_PROCESS_DIED Blue Screen, Step by Step

अनुमानित समय: ~20 मिनट5 stepsअंतिम सत्यापन:

Independent guide — no official affiliation with the platforms mentioned.

छोटा जवाब

CRITICAL_PROCESS_DIED means a critical Windows process crashed — usually corrupted drivers or disk errors. Boot into Safe Mode, run SFC/DISM repair and a 'chkdsk /f' scan, or remove the latest update for an instant fix.

01 — चरण-दर-चरण फिक्स

चरण-दर-चरण फिक्स

  1. STEP 01

    Boot into Safe Mode

    Force-restart the PC 3 times during boot to reach Recovery, then Troubleshoot > Advanced options > Startup Settings > Restart and press 4 (Safe Mode with Networking).

  2. STEP 02

    Uninstall the latest update

    From Recovery, choose 'Uninstall latest quality update'. If the error started after a Windows update, this fixes it directly.

  3. STEP 03

    Run SFC and DISM

    In Safe Mode open admin CMD and run 'sfc /scannow' then 'DISM /Online /Cleanup-Image /RestoreHealth'.

  4. STEP 04

    Scan the disk

    Run 'chkdsk C: /f /r' and confirm the restart. The scan takes 20–60 minutes and repairs disk errors.

    Don't power off during chkdsk. If the drive makes clicking sounds, back up immediately.

  5. STEP 05

    Check drivers

    In Device Manager find devices with warnings; update GPU and chipset drivers from the vendor's site, or roll back a recently updated driver.

सुझाव

  • Logging blue screen codes speeds up diagnosis of recurring issues.
  • If the loop continues, check SSD health with CrystalDiskInfo.

02 — अक्सर पूछे जाने वाले प्रश्न

अक्सर पूछे जाने वाले प्रश्न

What causes CRITICAL_PROCESS_DIED?

Most often corrupted system files, incompatible drivers, disk errors or RAM issues. If it started after an update, the update is the prime suspect.

The PC is stuck in a boot loop — what now?

Force-restart 3 times to reach Recovery. If that fails, use a Windows installation USB and choose 'Repair your computer'.

How do I test my RAM?

Search 'Windows Memory Diagnostic', run it and let the reboot test run. Results appear in Event Viewer.

इस गाइड ने इसे हल कर दिया?

आपकी प्रतिक्रिया हमारे गाइड में सुधार करती है — इसमें 10 सेकंड लगते हैं।

इस गाइड के लिंक आधिकारिक प्लेटफ़ॉर्म पृष्ठों की ओर इशारा करते हैं। चरण प्लेटफ़ॉर्म अपडेट के साथ बदल सकते हैं; पृष्ठ तिथि जांचें।

03 — संबंधित गाइड

संबंधित गाइड

CP-013Windows

Fix Windows Update Error 0x80070005 (Access Denied) for Good

Solve Windows Update 0x80070005 'access denied' with the troubleshooter, a SoftwareDistribution reset and SFC/DISM.

15 मिनटमध्यम18 सितंबर 2026
CP-023Windows

Fix Error 0x80004005: The 'Unspecified Error' in 6 Steps

Fix the 0x80004005 unspecified error step by step, covering update, file copy and virtual machine scenarios.

8 मिनटमध्यम24 सितंबर 2026
CP-024Windows

Fix Error 0x80070002: 'The System Cannot Find the File Specified'

Fix the 0x80070002 'file not found' update error with the troubleshooter, clock check and cache reset, step by step.

7 मिनटआसान24 सितंबर 2026
Windows Errors